Little help

So I'm looking for a little help in identifying this thing and trying to figure out what to do with it. A good friend of mine was garage hitting the local garage sale circuit when he came across this. now from the looks of it, it's a wine distributor. It's from a bar in Hamilton and has 8 plastic taps on it. The spurs are all plastic, bit the hammers and other parts on the taps are metal.

As you can see, there is a refrigerator built into the bottom half.

The taps go from the spur into a dip tube that runs through a bung. The bungs share a CO2 in that connects to a gas quick release valve (pretty bad ass to see quick release valves that small).

Each of the units has a mini Co2 regulator that seems to have the pressure regulated by a little turn thing on the bottom. There is a label on the front of both units that says "Premier Cru".

The bottom unit is built around a mini refrigerator, but this is not a home made project, it looks like the freezer in the unit is built much differently than I have seen before. I didn't get a picture, but it's built on it's side.

The door to the fridge has a glass from (double pane) and is totally sealed with refrigerator trim. The door itself seals tight and the fridge still works.

To be honest with you, the whole thing looks like it would work fine. I think the bungs need to be changed, but otherwise it's money. I am just deciding if it's something I can use for beer, or if it's wine only. The other thing I am wondering is if you leave wine on tap that is run with C02, does it go bad?

Maibock means May Bock

Nick was out of town so I decided to do a solo batch of maibock using a Munich yeast I had been holding onto for a while. This was the same yeast I used on the Oktoberfest. It's a great yeast and I have the fridge space to do it so I figured 'why not?'.

Anyone not familiar with Maibock I recommend giving one a try. My favorite is the Smuttynose Maibock. It's such a unique flavor. It tastes like you are drinking unfermented wort that is carbonated. Sounds a little weird, but it was honestly the only way I could describe it.

With this beer, I was shooting for an OG of 1.069 to give me a 7%abv brew that would be a smooth drinker with a little kick. The plan is to break this out in the fall (yea I know, May-bock not October-bock) for our Oktoberfest party to go with the OF brew and some brots. Should be a good one.

Here is the recipe:

12lbs German Pilsner
2.25lbs Munich Malt (light)
1.25lbs Vienna Malt
1/2oz Target (60 min)
1oz Liberty (60 min)
Wyeast 2308 - Munich Lager

Process
35min protein rest at 122f (added 4.25 gallons at 133f)
15min Decoction (2 gallons)
45min Rest at 145f
Mashout - 1 3/4 gal boiling - hold at 160f for 10min
Sparge - added 2.2gal of water to mashtun at 168f as wort ran off

The early runnings were 17.5brix (1.070) and the the pre-boil gravity at was at 14 brix (1.055). This was better than the projected 1.051, but in the end, it the gravity was less than the desired 1.069 by showing up at 1.067. Not too bad. It is still plenty in style and should have all the taste I want. The total brew day took about 4 1/2 hrs and was a pretty relaxing brew session. I forget how much more manageable everything is with 5 gallons.

I just checked it tonight and the brew is plugging away in the fridge. I love Munich yeast. Its like a good lineman, it shows up every Sunday and just works. No problems or questions.

Cheers!